Charging Bars

The generating bars in this section produce with highvoltage ions of a selected polarity on their emitter tips to deliberately charge larger surfaces (e.g. web or sheet) of 100 to 4000 mm, also moving, and thus make the material surface temporarily adhesive. (for tiny and small surfaces/width of 1 to 100 mm refer to Pinner and Spot Type Generators).

All presented generating bars are industry-proof robust, shock-proof– and non-sparking.

We have integrated the products due to the following operational characteristics in our product portfolio:

  • Operating range up to 75mm due to 50kV: A7155 A7150
  • For continuous frequent use, low wearout: A7155 A7150
  • Large width up to 4 m, high warp-resistance: A7155 A7150
  • Very homogenuous application of charge due to tight emitter pitch: A7155 A2020
  • Compact design, for tight fitting situations: A2020 A2010
  • Use with counter-electrode and yet compact: A2020 A2010
  • Occasional use with good performance: A2020 A2010

Due to their technical specifications, the presented charging bars can be operated on any HV generator make and are thus often an economic alternative in market areas with limited choice (e.g. short-cycle press etc.), often with standard connectors, but can also be shipped with “third-party” connectors. However, be aware that the plugs are different for 30 and 50 kV, so you must specify the desired voltage.

Note: the presented generating bars require a suitable HV Generator.

Our experienced domain experts are happy to visit you on-site to analyse the problem and challenge – get their professional advice!
A7155 View

A7155 View

A7150 View

A7150 View

A2020 View

A2020 View

A2010 View

A2010 View