An Ionising Airknife with good performance operated via blower*.
/ 
F5500: operating range up to 4m for antistatic discharge and <1m for cleaning depending on application.
For an easy to install and very efficient electrostatic cleaning, sheet separation, ionized air curtain or anti-static discharge over a distance of up to 4m, more economic than pressurized air solution.
Main feature of the F5500 is its sophisticated nozzle head which accelerates a laminar compressed airflow by a factor of 20:1 in a 90° angle over the ionizer thus generating a thin, fan-shaped non-turbulent ionized airflow.
+49 7628 35 94 064
We gladly help you to solve your problem.
*Blower not in scope of delivery
Please note: The AC ionizer, unlike the 24V DC counterparts, necessarily requires an additional AC Highvoltage Power Unit.
Variant AC Bar
The airknife F5500 is also available equipped with an AC bar, which is an older and slightly less efficient technology.
The air specification and performance however, is the same.
Monitoring Highvoltage Power Supply
E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Highvoltage Power Supply 4 Connections
E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
*The high voltage power supplies listed above also differ in load capacity, which defines the maximum cable length that can be connected: please refer to the detailed pages of the respective power supplies.