An Ionising Airknife for pressurised air in tight mounting situations.
/ 
F5000: operating range up to 4m for antistatic discharge and <1m for cleaning depending on application.
A compact and robust ionizing air nozzle with good performance for the neutralisation, sheet separation or cleaning of small surfaces and objects up to 1m operating distance.
The main feature of the F5000 airknife is its sophisticated nozzle head, which bends the air outflow in a 90 degree angle over its body and then over the emitter tips of the anti-static bar. This brings an advantage in required mounting space especially beneficial in tight mounting situations. The achieved airbeam is thin and fan-shaped.
+49 7628 35 94 064
We gladly help you to solve your problem.
*Please note: The AC ionizer, unlike the 24V DC counterparts, necessarily requires an additional AC Highvoltage Power Unit
Variant AC Bar
The airknife F5000 is also available equipped with an AC bar, which is an older and slightly less efficient technology.
The air specification and performance however, is the same.
Monitoring Highvoltage Power Supply
E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Highvoltage Power Supply 4 Connections
E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
*The high voltage power supplies listed above also differ in load capacity, which defines the maximum cable length that can be connected: please refer to the detailed pages of the respective power supplies.