E1100n
E1100 OEM HV Power Supply
A simple Highvoltage Power Supply to connect one ioniser/bar.
Operating output: +/- 5,5kV A very simple HV power supply for neutralisation with 1 ioniser. The E1100 is a reliable generator for HV to power 1 ioniser with a cable length of up to 8m*! Choice of case body color or own logo print on request.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E1100 Specifications
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at 5,5 kV
- Auto-shut-down at 5mA
- Illuminated power switch
- Bajonet connector for 1 ionisers
- Cable length per unit*: max. 8 m minus length of bar x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- Choice of case color or own logo print on request
- CE qualification
Simple HV power supply with good performance
Robust, industry-proof design
Easy and flexible mounting
For up to 2 ionisers
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E2100
E2100 OEM HV Power Supply
A simple Highvoltage Power Supply to connect two ionisers/bars.
Operating output: 5,5kV A robust HV power supply unit for use when 2 ionisers need to be powered. The E2100 is reliably generating the required highvoltage to connect up to 2 ionisers with up to 15 m cable length*! Choice of case color or own logo print on request.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E2100 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at 5,5 kV
- Auto-shut-down at 5mA
- Illuminated power switch
- Bajonet connectors for up to 2 ionisers
- Cable length per unit*: max. 15 m minus length of bar x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- Choice of case color or own logo print on request
- UL, CE and CB certified
Simple HV power supply with good performance
Robust, industry-proof design
Easy and flexible mounting
For up to 2 ionisers
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E3100
E3100 Standard HV Power Supply
The HV Power Supply for several also longer bars and cables.
Operating output: +/- 6 kV An HV power supply unit with good performance wherever more than 1 ionisers are required for neutralisation. The E3100 is generating the highvoltage for up to 4 anti-static devices with up to 30 m cable length*!Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3100 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at +/- 6 kV
- Auto-shut-down at 5mA; unit switches automatically on when overcharge is reduced
- Illuminated power switch
- Bajonet connectors for up to 4 ionisers
- Cable length per unit*: max. 30 m minus length of bars x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- UL, CE and CB certified
Top HV power supply with top performance
Robust, industry-proof design
Easy and flexible mounting
Can be integrated into process control system
Low maintenance
Variant ATEX Bars
Variant for EX1250 antistatic bars with ATEX certification
The E3100-EX is designed specifically for the use with the ex-proof Antistatic Bar EX1250. The difference to the standard HV power supply E3100 is only in technical constraints and fuse with regard to the follwong specifications: the E3100-EX is limited to 20 VA power consumption and 5mA output; output voltage is 6 kV with a max. peak at 7,75 kV. The fuses are laid out for 800 mA at 115V and 400 mA at 230 V.
NOTE: the power unit itself is NOT ex-proof and requires installation outside the hazardous area. The max. allowed current for the ATEX certification is 5 mA. Consequently, per power unit a maximum of 30 m cable minus 1,5 times the length of the bar(s)*. This equates for example to:
- 2 antistatic bars of 1 m length and each with 11,5 m cable
- 3 antistatic bars of 1 m length and each with 7 m cable
- 4 antistatic bars of 0,75 m length and each with 5,5 m cable
- etc.
Variant Harting Connector
E3100/3111 with Harting Connector
Variant for powering via Harting connector
The HV power supply unit can also be ordered upon request with a Harting connector as pluggable main connector instead of a fixed mains cable and plug*.
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E3111
E3111 Monitoring HV Power Supply Unit
The power supply unit which detects contamination and monitors operation.
Operation output: +/- 6 kV An intelligent HV power supply unit with good performance wherever more than 1 ionisers are required for neutralisation in a continuous and critical productive use. The E3111 is not only generating the highvoltage for up to 4 antistatic devices with up to 30 m cable length*, but also monitoring the status and neutralisation of the ionizer, as well as maintenance need and sending signals to process control panels !Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3111 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at +/- 6 kV
- Auto-shut-down at 5mA; unit switches automatically on when overcharge is reduced
- Illuminated power switch
- Bajonet connectors for up to 4 ionisers
- LED display: contamination control w. 5 level, operation, charge, HV active, malfunction
- Interface with galvanically isolated signal outputs for operations, contamination pre-warning, contamination, malfunction
- Cable length per unit*: max. 30 m minus length of bars x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- UL, CE and CB certified
Top HV power supply with top performance
Robust, industry-proof design
Easy and flexible mounting
Can be integrated into process control system
Low maintenance
Built-in monitoring system for ionisers and their status
The only device on the market to detect conductive AND non-conductive dirt on the electrodes
Variant ATEX Bars
Variant for EX1250 antistatic bars with ATEX certification
The E3111-EX is designed specifically for the use with the ex-proof Antistatic Bar EX1250. The difference to the standard HV power supply E3111 is only in technical constraints and fuse with regard to the follwong specifications: the E3111-EX is limited to 20 VA power consumption and 5mA output; output voltage is +/- 6 kV with a max. peak at 7,75 kV. The fuses are laid out for 800 mA at 115V and 400 mA at 230 V.
NOTE: the power unit itself is NOT ex-proof and requires installation outside the hazardous area. The max. allowed current for the ATEX certification is 5 mA. Consequently, per power unit a maximum of 30 m cable minus 1,5 times the length of the bar(s)*. This equates for example to:
- 2 antistatic bars of 1 m length and each with 11,5 m cable
- 3 antistatic bars of 1 m length and each with 7 m cable
- 4 antistatic bars of 0,75 m length and each with 5,5 m cable
- etc.
Variant Harting Connector
E3111 with Harting Connector
Variant for powering via Harting connector
The HV power supply unit can also be ordered upon request with a Harting connector as pluggable main connector instead of a fixed mains cable and plug*.
No specific accessories.
For mounting aides and instructions consult us.