A2013
A2013 Spot Type Pinner
A spot type Pinner with long shaft for edge pinning in hot environment.
A2013: operating distances 10 – 25 mm A spot/point type charging ioniser with good performance for up to 25 mm operating distance at 30 kV perfect for easy edge stripe adhesion tasks. The A2013 has a flexible and arc erosion retardant durable tungsten emitter for small, simple yet exact fixation tasks for many industrial areas.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2013 Specification
- Operating range*: 10 – 25 mm
- Case: Ø 20 mm and 500 mm length
- Weight only 140 g (without cable)
- HV power supply 30 kV
- 1 flexible exchangeable tungsten emitter tip Ø 3 mm
- Robust flame-retardant PVC case
- Flexible and screened 2m nylon cable (longer on request
up to 10 m)
*Depending on material and expected adhesion affect
Can also be powered with generators from other manufacturers
Low maintenance
Robust, industry-proof design
Heat and flame-resistant casing
Flexible emitter placement –adjustable to need
Easy and flexible installation also for tight installation situations
Compact point/spot type pinner with good charging performance
Shockless
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
Replacement Emitters
Various exchangeable tungsten emitter tips
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA
All products within this product category:
A2014
A2014 Multi-Tip Generator
A reliable three-tip Pinner with tungsten tips and a PTFE body.
A2014: operating distance 10 – 25 mm An edge/stripe pinner with excellent performance for up to 25 mm operating distance at 30 kV and the optional use of 1 to 3 emitters for effective edge stripe adhesion. The A2014 has a heat-resistant PTFE teflon-case and 3 flexible and exchangeable emitter tips for tasks requiring exact adhesion (e.g. cast film edge strip adhesion against “neck-in”).Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2014 Specification
- Operating range: 10 – 25 mm
- Case diameter Ø 20 mm
- Weight only 140 g (without cable)
- HV power supply 30 kV
- 3 flexible exchangeable emitters each Ø 3 mm resistant to arc erosion
- Long-life tungsten emitter tips
- Operation with 1 to 3 emitter possible
- Robust PTFE teflon-case
- Heat-resistant to 140°C (=emitter and PTFE case, cable up to 80°C)
- Flexible and screened 2m nylon cable (longer on request up to 10 m)*
*Depending on material and expected adhesion affect
Can also be powered with generators from other manufacturers
Low maintenance
Heat-resistant up to 140°C
Flexible emitter number and placement adjustable to need
Easy and flexible installation
Compact 3-tip pinner with good charging performance
Shockless
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
Emitter Replacement Sets
Diverse bendable emitter tips tungsten made as set of 3 available
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA
All products within this product category:
A2016
A2016 Manual Spot Type Pinner
An easy to use and safe hand-pinner for manual fixation tasks.
A2016: operating distance 10 – 25 mm A spot/point type charging ioniser with good performance for up to 25 mm operating distance at 30 kV perfect for easy manual adhesion tasks The A2016 has a bendable and arc erosion retardant durable tungsten emitter for easy manual fixation tasks for many industrial areas (e.g. In-Mould Labelling). Highvoltage is easily and comfortably activated and deactivated via push button on the handle.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2016 Specification
- Operating range*: 10 – 50 mm
- Case: Ø 20 mm and 342 mm length
- Weight only 200 g (without cable)
- HV power supply 30 kV
- 1 flexible exchangeable tungsten emitter tip
- Robust fibre-glass and PVC case
- Push button on handle and connection to control generator (Type D connector for A7320)
- Flexible and screened 3m nylon cable (longer on)
- Comes with ESD wrist strap
*Depending on material and expected adhesion affect
Long shaft also allows good access to cavities
Robust, industry-proof design
Robust and lightweight point/spot type generator for manual charging
Low maintenance
Shockproof
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA
All products within this product category:
A2012
A2012 Small Surface Pinner
A very compact small surface Pinner with good charging due to it’s triple pin tip.
A2012: opearting distance 10 – 25 mm A pinner with good performance for up to 25 mm operating distance at 30 kV and emission width of app. 20-40 mm*. The A2012 is cased in a resistant and small round PVC body encapsulated in epoxy resin and offers thanks to the tungsten-carbide tip a long life.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2012 Specification
- Operating distance*: 10 – 25 mm
- Diameter 20 mm
- Weight only 140 g (without cable)
- HV power supply 30 kV
- Tungsten-carbide emitters
- Robust flame-retardant PVC case
- Encapsulated in epoxy resin
- Flexible and screened 2m nylon cable (longer on request)
*Depending on material and expected adhesion affect
Can be also powered by thirdparty generators, ask us
Robust, industry-proof design
Low maintenance
Easy and flexible installation
Compact spot-type pinner with excellent performance
Shockproof
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA
All products within this product category:
A2015
A2015 Area Pinner
A compact 8cm Pinner with space-saving cable outlet on the back-side.
A2015: operating distance 10 – 25 mm An area pinner with good performance for up to 25 mm operating distances to the material at 30 kV and an emission width of 80-100 mm. The A2015 is installed in a resistant and small PVC case and offers with its 6 emitter tips a good, homogeneous and strong charging performance.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2015 Specification
- Operating range*: 10 – 25 mm
- Case only 75 x 25 mm
- Weight only 160 g (without cable)
- Required HV power supply: 30 kV
- Inherently stable voltage-limited steel emitter with 10 mm pitch
- Robust flame-retardant PVC case
- Encapsulated with epoxy resin
- Flexible and screened 2m nylon cable (longer on request)*
*Depending on material and expected adhesion affect
Can also be powered with generators from other manufacturers
Low maintenance
App. 8cm strip charging
Compact dimensions
Easy and flexible mounting
Robust pinner with good charging performance
Shockproof
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA
All products within this product category:
A1230
A1230 Ultra-compact HV Generator 30kV
The most compact and flexible Generator in the marketplace for easy fixation uses.
A very small 30 kV HV generator reliably providing the required highvoltage for easy to be charged material. The A1230 is supplying devices with 30 kV at reliable 8 W power. It is simple to operate and can directly be fed with 24 V from the DC net of your machinery.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A1230 Specification
- Adjustable output: 2-30 kV and 0-1 mA
- 2 HV outputs, screw-type plug-in connection
- Very compact dimensions
- Main supply: 24V DC with max. 1A (can also be powered with optional wide-range AC power supply unit)
- Polarity: negative or positive
- Easy operation via 3 soft-buttons
- Digital LED-display for set value, actual value and output current
- Analog signal interface with status data and interface to control charge parameter
- Input protection for over-, under-voltage and wrong polarity
- Short-circuit- and arc-protected HV outputs
*specify on ordering
Solid 30 kV generator with compact dimensions
Low maintenance
Easy and flexible installation
Can be integrated into production control: Extensive remote control options
Can be fed from 24V DC machine and control net
Very compact dimensions – space-saving
Robust, industry-proof design
Connection Cable Supply and Control 5 or 10 m M12 connection cable with 5-pin plug (female) for 24VDC supply and remote control
Connection Cable Signal Output
5 or 10 m M12 connection cable with 5-pin plug (male) to route signals to a PLC etc.
AC Connection
Wide-range power supply unit 100-240 VAC with 1,5m cable
All products within this product category:
A7320
A7320 Compact HV Generator 30kV
The 30kV Generator with UL certification for standard use at a fair price.
A reliable 30kV HV generator with unparalleled performance (20 Watts) at it’s compact dimensions – able to feed up to 4 charging systems simultaneously. The A7320 reliably feeds constant current or (high)voltage. It has an easy to use front panel and with it’s interface can be remotely monitored or completely integrated into PLC systems. With its 20 Watts the A7320 is the most compact in this performance class. and UL certification.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A7320 Specification
- Adjustable output: 0-30 kV in 0,1 kV steps
- To 20 kV with 1 mA and then to 30 kV with 0,67 mA
- 4 HV outputs, screw-type plug-in connection
- Fast rise times (app. 15 ms)
- Compact dimensions: 276 x 161 x 103 mm
- Operation modes: HV- or current-controlled (in 0,1 mA steps)
- Main supply: 90-264V AC or 21-28V DC at 5A
- Polarity: negative or positive models available
- LEDs for HV on, interface active, current limitation on
- Front Panel with bright LED display fot control and text messages; soft buttons for HV on/off, HV- and current-steps up and down; display can be rotated 180 degrees
- Interface for remote monitoring (overload, arc) and/or remote control (HV on/off, HV in %)
- Short-circuit-, overheat- and arc-protection
- CE (EU LVD (2014/35/EU) and EU EMCD (2014/30/EU))
*bei Bestellung angeben
Easy manual operation and display
Favourable price-performance ratio
Solid 30 kV Generator with very compact dimensions
Constant performance across the HV output
Easy manual operation and display
Low maintenance
Full integration into machine control systems possible
Robust, industry-proof design
(Analog) Interface Connector
For standard ANALOGUE interface in mini D-Sub 25 pin for self assembly of signal cables.
All products within this product category:
A730150
A730150 Highperformance Generator 30kV
The powerful 30kV Generator for strong charging with 5mA in industrial processes.
A performant 30 kV HV generator for strong charging performance also to feed several charging ionisers simultaneously with 5 mA (150 W power). The A730150 is not only a strong performer, but also delivers a very constant power and/or current output and, thanks to its interface allows remote monitoring or can be completely integrated into the machinery control.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A730150 Specification
- Adjustable output: 0-30 kV in 0,1 kV and 0-5 mA in 0,01 mA steps
- Output power 150 W at 30 kV (5 mA)
- 4 HV outputs, screw-type plug-in connection
- Fast rise and decay times (60ms and 10ms)
- Main supply: 90-264V AC at 3 A
- Polarity: negative or positive models available
- LEDs for HV on, interface active, current limitation on
- Front Panel with bright LED display fot control and text messages; soft buttons for HV on/off, HV- and current-steps up and down; display can be rotated 180 degrees
- Interface for remote monitoring (overload, arc) and/or remote control (HV on/off, HV in %)
- Short-circuit-, overheat- and arc-protection
*specify on ordering
Easy manual operation and display
Favourable price-performance ratio
Strong 30 kV Generator with top performance
Fast reaction times for cycled applications
Easy manual operation and display
Low maintenance
Full integration into machine control systems possible
Robust, industry-proof design
Option Profibus Control
With the Profibus interface card you bring the functional range of the control system and alarms as DP-V1 to a standardized Profibus connection (9-pin D-Sub) and can thus integrate the generator into your production control via this protocol.
The Profibus option can be ordered already installed, but can also be retrofitted if required.
(Analog) Interface Connector
For standard ANALOGUE interface in mini D-Sub 25 pin for self assembly of signal cables.
Profibus Interface Card
Interface module for integrated fieldbus interface for DP-V1 protocol with standardized D-Sub 9-pin plug connection.
All products within this product category:
A760150
A760150 Highperformance Generator 60kV
The powerful 60kV Generator for strong charging in industrial processes.
A powerful 60 kV HV generator for strong charging performance also to feed several charging ionisers simultaneously with 2,5 mA (150 W power). The A760150 is not only a strong performer, but also delivers a very constant power and/or current output and, thanks to its interface allows remote monitoring or can be completely integrated into the machinery.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A760150 Specification
- Adjustable output: 0-60 kV in 0,1 kV and 0-2,5 mA in 0,01 mA steps
- Output power 150 W at 60 kV (2,5 mA)
- 4 HV outputs, screw-type plug-in connection
- Fast rise and decay times (100ms and 10ms)
- Main supply: 90-264V AC at 3 A
- Polarity: negative or positive models available
- LEDs for HV on, interface active, current limitation on
- Front Panel with bright LED display fot control and text messages; soft buttons for HV on/off, HV- and current-steps up and down; display can be rotated 180 degrees
- Interface for remote monitoring (overload, arc) and/or remote control (HV on/off, HV in %)
- Short-circuit-, overheat- and arc-protection
*specify on ordering
Easy manual operation and display
Favourable price-performance ratio
Strong 60 kV Generator with top performance
Fast reaction times for cycled applications
Easy manual operation and display
Low maintenance
Full integration into machine control systems possible
Robust, industry-proof design
Option Profibus Control
With the Profibus interface card you bring the functional range of the control system and alarms as DP-V1 to a standardized Profibus connection (9-pin D-Sub) and can thus integrate the generator into your production control via this protocol.
The Profibus option can be ordered already installed, but can also be retrofitted if required.
(Analog) Interface Connector
For standard ANALOGUE interface in mini D-Sub 25 pin for self assembly of signal cables.
Profibus Interface Card
Interface module for integrated fieldbus interface for DP-V1 protocol with standardized D-Sub 9-pin plug connection.
All products within this product category:
A2010
A2010 Compact Generating Bar
The Workhorse Charging Bar for standard use cases at a good price.
A2010: Arbeitsbereich: 10 – 25 mm A generating bar with good performance for up to 25 mm operating distance to the material at 30 kV and very compact dimensions. The A2010 is integrated in a resistant and small PVC case and with it’s mounting slot and choice of cable exits is offering a flexible installation options.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
A2010 Specification
- Operating distance*: 10 – 25 mm
- Case only 45 x 20 mm
- Length from 60 to max. 4000 mm
- Power Supply 30 kV**
- Inherently stable voltage-limited steel emitter with 10 mm pitch
- Robust PVC case
- Encapsulated with epoxy resin
- Flexible and screened 2m nylon cable (longer on request)
- Cable connection 30 kV HV; third-party connectors on request
- Mounting slot on back
* Depending on material and expected adhesion affect
**The bar can be operated with up to 60 kV but in which case it needs to be mounted with specific isolators, the best is you consult us.
Can be also powered by thirdparty generators, ask us
Very compact, good for electrode-counter-electrode set-ups
Robust, industry-proof design
Easy and flexible installation over large width range
Low maintenance
Compact bar with good charging
Shockless
Variant Cable Exits
Variants with different cable exits
The A2020 comes with a straight cable outlet as standard, but is also available with a lateral 90° angle or even a connection on the bottom.
High-performance Generator 60kV
A760150 High-performance Generator 60kV with display/control unit to control output from 0-60 kV with 150 Watt 0-2,5 mA; interface for remote control
Highvoltage Generator 30kV (24V oder AC)
A7320 Highvoltage Generator 30kV with analog interface for PLC integration and control of output for 0-30 kV and 20 Watt 0-1 mA
Ultra-compact Highvoltage Generator 30kV
A1230 Highvoltage Generator 30kV with display/control unit and interface for PLC integration and control of output for 0-30 kV and 8 Watt ca. 0-1 mA
High-performance Generator 30kV
A730150 High-performance Generator 30kV with display/control unit to control output from 0-30 kV with 150 Watt 0-5 mA; interface for remote control
OEM Highvoltage Generator 30kV (24V oder AC)
A7333 OEM Highvoltage Generator 30kV only with analog interface for PLC integration and control of output 0-30 kV and 30 Watt 0-1 mA