F801
F801 Antistatic Tinsel
The proven, sturdy and resistant solution for rough charge reduction.
F801: operating distance 1 – max. 10 mm Ideal for crude or pre-discharge especially for only occasionally occurring problems, where avoidance of disturbances for personnel is in the focus. The Anti-Static Tinsel F801 consists to 99% of pure copper ideal to bundle the electrical field and ionise the air.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F801 Specification
- Working range 1* up to max. 20 mm
- Diameter of tinsel strand ca. 32 mm
- Solid copper wire in core
- Comes in boxes with 22 or 110 m (5x22m)
- Tensile load max. 10 kg
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion or fracture despite good manufacturing.
Robust
Acceptable charge reduction
Ease of installation
Mounting Magnet
Quick fastening set with mounting magnet with clamp Ø 25 mm, holding force app. 150 N to be attached to grounded machine parts
All products within this product category:
F850
F850 Antistatic Cord
Antistatic Cord is crosscut from reel and stretched over the material.
F850: operating distance 1 – max. 5 mm Ideal for crude or pre-discharge especially in cases of high voltages and high (web) speeds an effective and competitive way of charge reduction with low fibre abrasion. The Antistatic Cord F850 has a large amount of micro-fibres for an efficient ionisation/conduction and is quickly installed: either it is simply placed directly on the material or is firmly tightened some millimetres over the material surface* and, in both cases, a connection to the ground ensured.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F850 Specification
- Working range 1 up to max. 10 mm
- Diameter of cord: 2-2,5 mm
- Versions: F850-E elastic (for tightening) or F850 non-elastic
- Length: in reels with 10m
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion or fracture despite good manufacturing
Robust, easy integration
Good charge reduction to prevent sparks and shocks
Less fibre loss than plastic fiber brushes
Washable
Easy and flexible mounting and unmounting
Mounting Magnet
Quick fastening set with mounting magnet with clamp Ø 25 mm, holding force app. 150 N to be attached to grounded machine parts
All products within this product category:
F660
F660 Antistatic Steel-Fibre Brush
The solid and robust Antistatic Brush with fortified fibre strands.
F660: operating distance 1 – max. 5 mm Ideal for crude or pre-discharge, especially in cases of high charges an effective and competitive way of charge reduction. The Steel-Fibre Brush F660 has a large number of fine stainless steel filaments and ships mounted on a rigid aluminium profile. The steel-fibre brushes offer less fiber loss than plastic fiber brushes.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F660 Specification
- Working range 0* up to max. 5 mm
- Soft and highly conductive stainless steel filaments
- Fibre diameter of 12 μm
- Fibre strands of 250 filaments at a pitch of 1,5mm
- Rigid 12 mm aluminium case
- Ethylene-Vinyl-Acetate (EVA) coating of fibre strands to ensure elasticity and resilience/memory
- Ships in 1 m length and can be shortened or drilled (for installation) at own discretion
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion or fracture despite good manufacturing..
Robust, easy integration
Good charge reduction to prevent sparks and shocks
Less fibre loss than plastic fiber brushes
Easy and flexible mounting
No specific accessories.
All products within this product category:
F406-409
F406/409 Antistatic Tape Brush
Easy to install Anti-Static Tape Brush which can be crosscut from a reel.
F406/409: operating distance 1 – max. 5 mm Ideal for crude or pre-discharge, with a flexbile and easy way of installing and especially in cases of high charges an effective and competitive way of charge reduction. The steel-fibre Tape Brushes F406 and F409 do have large number of fine filaments which are mounted on a flexible self-adhesive beam strip and can directly be sticked to conductive and grounded machine parts.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F406/409 Specification
- Working range 0* up to max. 5 mm
- Soft highly conductive stainless steel filaments
- Fibre diameter 12 μm
- Flexible self-adhesive paper/aluminium beam strips with conductive acrylic adhesive
- Fibre strands at a pitch of 1,5mm
- Ethylene-Vinyl-Acetate (EVA) coating of fibre strands to ensure elasticity and resilience/memory
- Length at choice, cut to meter or bulk as 25 m reels
- Version 406/7: fibre length 7mm on 6mm paper strip
- Version 409/11: fibre length 11mm on 9mm aluminium strip
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion or fracture despite good manufacturing.
** provided that the place of installation offers sufficient grounded contact surface (e.g. remove paint from machine chair)
Robust, easy integration
Good charge reduction to prevent sparks and shocks
Less fibre abrasion and loss than synthetic fibres
Installation can follow curves if required
Easy and flexible mounting: can be adhered to machine, no additional grounding cable required**
No specific accessories.
All products within this product category:
E102-202
E102/202 Anti-Static Nylon Brush
The robust ionising Anti-Static Brush with resistant nylon fibres.
E102/202: operating distance 1 – max. 5 mm Ideal for crude or pre-discharge, especially in dusty work environments and cases of high charges an effective and competitive way of charge reduction The Anti-Static Nylon Brushes E102/202 do have many fine fibres, which are generally more resistant than the carbon fibres of the E101/201 version and can easily be washed from dust and contamination with water.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E102/202 Specification
- Working range 1* bis max. 5 mm
- Fibre diameter 35 μm
- 000 fibres per cm
- Standard fibre length 18 mm, additionally on request available: 30, 50, 80 mm
- Version 102: with h-shaped aluminium profile for individual mounting hole drilling
- Version 202: on aluminium support with mounting screws
- Any custom length available: E102 up to 4 m, E202 up to 3 m
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion
or fracture despite good manufacturing
Robust, easy integration
Easy and flexible mounting
Good charge reduction to prevent sparks and shocks
Washable
No specific accessories.
All products within this product category:
E101-201
E101/201 Anti-Static Carbon Brush
The efficient ionising Anti-Static Brush with high carbon fibre density.
E101/102: operating distance 1 – max. 5 mm Ideal for crude or pre-discharge especially in cases of very high voltages an effective and competitive way of charge reduction. The Carbon Brushes E101/201 have large amounts of very fine fibres, able to lead away charges through self-ionisation. Also available in an EX-version with ATEX-certification.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E101/201 Specification
- Working range 1* to app. 5 mm
- Fibre diameter 7 μm
- 000 fibres per cm
- Standard fibre length 18 mm, additionally on request available: 30, 50, 80 mm
- Version 101: with h-shaped aluminium profile for individual mounting hole drilling
- Version 201: on aluminium support with mounting screws
- Any custom length available: E101 up to 4 m, E201 up to 3 m
*Contact with surface is for the ionization effect counter-productive and can lead to fibre abrasion or fracture despite good manufacturing.
Robust, easy integration
Easy and flexible mounting
Good charge reduction to prevent sparking and shocks
No specific accessories.
All products within this product category:
E1100n
E1100 OEM HV Power Supply
A simple Highvoltage Power Supply to connect one ioniser/bar.
Operating output: +/- 5,5kV A very simple HV power supply for neutralisation with 1 ioniser. The E1100 is a reliable generator for HV to power 1 ioniser with a cable length of up to 8m*! Choice of case body color or own logo print on request.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E1100 Specifications
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at 5,5 kV
- Auto-shut-down at 5mA
- Illuminated power switch
- Bajonet connector for 1 ionisers
- Cable length per unit*: max. 8 m minus length of bar x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- Choice of case color or own logo print on request
- CE qualification
Simple HV power supply with good performance
Robust, industry-proof design
Easy and flexible mounting
For up to 2 ionisers
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E2100
E2100 OEM HV Power Supply
A simple Highvoltage Power Supply to connect two ionisers/bars.
Operating output: 5,5kV A robust HV power supply unit for use when 2 ionisers need to be powered. The E2100 is reliably generating the required highvoltage to connect up to 2 ionisers with up to 15 m cable length*! Choice of case color or own logo print on request.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E2100 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at 5,5 kV
- Auto-shut-down at 5mA
- Illuminated power switch
- Bajonet connectors for up to 2 ionisers
- Cable length per unit*: max. 15 m minus length of bar x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- Choice of case color or own logo print on request
- UL, CE and CB certified
Simple HV power supply with good performance
Robust, industry-proof design
Easy and flexible mounting
For up to 2 ionisers
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E3100
E3100 Standard HV Power Supply
The HV Power Supply for several also longer bars and cables.
Operating output: +/- 6 kV An HV power supply unit with good performance wherever more than 1 ionisers are required for neutralisation. The E3100 is generating the highvoltage for up to 4 anti-static devices with up to 30 m cable length*!Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3100 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at +/- 6 kV
- Auto-shut-down at 5mA; unit switches automatically on when overcharge is reduced
- Illuminated power switch
- Bajonet connectors for up to 4 ionisers
- Cable length per unit*: max. 30 m minus length of bars x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- UL, CE and CB certified
Top HV power supply with top performance
Robust, industry-proof design
Easy and flexible mounting
Can be integrated into process control system
Low maintenance
Variant ATEX Bars
Variant for EX1250 antistatic bars with ATEX certification
The E3100-EX is designed specifically for the use with the ex-proof Antistatic Bar EX1250. The difference to the standard HV power supply E3100 is only in technical constraints and fuse with regard to the follwong specifications: the E3100-EX is limited to 20 VA power consumption and 5mA output; output voltage is 6 kV with a max. peak at 7,75 kV. The fuses are laid out for 800 mA at 115V and 400 mA at 230 V.
NOTE: the power unit itself is NOT ex-proof and requires installation outside the hazardous area. The max. allowed current for the ATEX certification is 5 mA. Consequently, per power unit a maximum of 30 m cable minus 1,5 times the length of the bar(s)*. This equates for example to:
- 2 antistatic bars of 1 m length and each with 11,5 m cable
- 3 antistatic bars of 1 m length and each with 7 m cable
- 4 antistatic bars of 0,75 m length and each with 5,5 m cable
- etc.
Variant Harting Connector
E3100/3111 with Harting Connector
Variant for powering via Harting connector
The HV power supply unit can also be ordered upon request with a Harting connector as pluggable main connector instead of a fixed mains cable and plug*.
No specific accessories.
For mounting aides and instructions consult us.
All products within this product category:
E3111
E3111 Monitoring HV Power Supply Unit
The power supply unit which detects contamination and monitors operation.
Operation output: +/- 6 kV An intelligent HV power supply unit with good performance wherever more than 1 ionisers are required for neutralisation in a continuous and critical productive use. The E3111 is not only generating the highvoltage for up to 4 antistatic devices with up to 30 m cable length*, but also monitoring the status and neutralisation of the ionizer, as well as maintenance need and sending signals to process control panels !Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3111 Specification
- Power input: 230V AC 50/60Hz; 115V AC 60Hz
- Power consumption: 40VA max.
- Output: max. 5mA at +/- 6 kV
- Auto-shut-down at 5mA; unit switches automatically on when overcharge is reduced
- Illuminated power switch
- Bajonet connectors for up to 4 ionisers
- LED display: contamination control w. 5 level, operation, charge, HV active, malfunction
- Interface with galvanically isolated signal outputs for operations, contamination pre-warning, contamination, malfunction
- Cable length per unit*: max. 30 m minus length of bars x 1,5
- Powder coated steel case IP54 with mounting brackets for walls
- UL, CE and CB certified
Top HV power supply with top performance
Robust, industry-proof design
Easy and flexible mounting
Can be integrated into process control system
Low maintenance
Built-in monitoring system for ionisers and their status
The only device on the market to detect conductive AND non-conductive dirt on the electrodes
Variant ATEX Bars
Variant for EX1250 antistatic bars with ATEX certification
The E3111-EX is designed specifically for the use with the ex-proof Antistatic Bar EX1250. The difference to the standard HV power supply E3111 is only in technical constraints and fuse with regard to the follwong specifications: the E3111-EX is limited to 20 VA power consumption and 5mA output; output voltage is +/- 6 kV with a max. peak at 7,75 kV. The fuses are laid out for 800 mA at 115V and 400 mA at 230 V.
NOTE: the power unit itself is NOT ex-proof and requires installation outside the hazardous area. The max. allowed current for the ATEX certification is 5 mA. Consequently, per power unit a maximum of 30 m cable minus 1,5 times the length of the bar(s)*. This equates for example to:
- 2 antistatic bars of 1 m length and each with 11,5 m cable
- 3 antistatic bars of 1 m length and each with 7 m cable
- 4 antistatic bars of 0,75 m length and each with 5,5 m cable
- etc.
Variant Harting Connector
E3111 with Harting Connector
Variant for powering via Harting connector
The HV power supply unit can also be ordered upon request with a Harting connector as pluggable main connector instead of a fixed mains cable and plug*.
No specific accessories.
For mounting aides and instructions consult us.