E3420
/in Weitbereichselektrode /by adm1n1strat0rE3420 Reactive Longrange Bar
The reactive Anti-Static Bar for mid to longer range distances.
Operating range 150 – 800 mm A compact, strong and robust neutralising bar with excellent performance and relatively convenient installation dimensions given the integrated HV generation. The E3420 is ideal wherever in midrange to larger distances strong and fast neutralisation is required – thanks to a sensory mechanism it adapts it’s ionising strength to the charge.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3420 Specifications
- Range from 150 to 800* mm
- Length from 450 mm in 150 mm steps to max. 4950 mm
- Power Supply 24 VDC at 2,0 A
- Integrated performant high-voltage generation
- Reactive adjustment to crude charge via sensory mechanism to 700 mm
- Automatic or manual mode
- Resistively coupled emitters for safety
- Replaceable tungsten emitter tips protected against impact
- All high-voltage parts integrated and encapsulated (IP67) in 67 x 28 mm ABS-casing
- LED-Display of operation, maintenance need or malfunction
- Analog output with M12 5-Pin connector
- CE, UL and CB cert.
* in manual mode
For midrange distances and complex mounting situations
Low power consumption, no air needed
Robust, industry-proof design
Easy mounting
Integrated operation monitoring
Low Maintenance
Very efficient neutralisation due to self-adjustment and strong performance
Shockless, finger-safe
AC Connection Wide-range power supply 80-250 VAC with 5m feed cable
Supply cables 24VDC
2, 5 or 10m cable for connection to 24 VDC Anschluss an 24V DC operating supply
Mounting Set
Set with mounting plate, with bolt and nut
Replacement Emitters
Replaceable tungsten emitter tips, threaded system
All products within this product category:
E3430
/in Weitbereichselektrode /by adm1n1strat0rE3430 Reactive Power Bar
The Power Pack for large and changing working ranges.
Operating range 200 – 1’500 mm Best use where large distances (up to 1,5 meters!) and strong discharge performance without air supply are required. The E3430 scores with its unrivalled range and excellent neutralisation performance – thanks to a sensory mechanism it adapts it’s ionising strength to the charge up to a working range of 1000 mm.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3430 Specifications
- Range from 20 cm to 1,50 m (!)*
- Length from 600 mm the 750 mm in 250 mm steps to max. 5000 mm
- Power Supply 24 VDC at 2,2 A
- Integrated performant high-voltage generation
- Reactive adjustment to charge via sensory mechanism to 1000 mm
- Automatic or manual mode
- Resistively coupled emitters for safety
- Replaceable tungsten emitter tips protected against impact
- All high-voltage parts integrated and encapsulated in 76 x 34 mm ABS-casing
- LED-Display of operation, maintenance need or malfunction
- Analog output with M12 Pin connector
- E3430-OEM: analog input M8 Pin
- UL and CB pending
* in manual mode
Large distances and difficult installation situations possible
Low power consumption, no air needed
Robust, industry-proof design
Easy mounting
Integrated operation monitoring
Low Maintenance
Very efficient neutralisation due to self-adjustment and strong performance
Shockless, finger-safe
Variant Machine-controlled E3430-OEM
The E3430-OEM can adjust its frequency via external signals to achieve discharge results that are coordinated with the machine control.
Compared to the standard E3430, it offers an additional interface to receive an analog signal from a machine controller.
AC Connection Wide-range power supply 80-250 VAC with 5m feed cable
Supply cables 24VDC
2, 5 or 10m cable for connection to 24 VDC Anschluss an 24V DC operating supply
Mounting Set
Set with mounting plate, with bolt and nut
Replacement Emitters
Replaceable tungsten emitter tips, threaded system
All products within this product category:
E3633
/in Weitbereichselektrode /by adm1n1strat0rE3633 Reactive Antistatic Power-Bar
The ultimate Power Pack on the market for very demanding distances.
Operating range: 250 – 1000 mm Best use where large distances (up to 1,5 meters!) and strong discharge performance without air supply are required (e.g. large winders, turret winders, large objects on conveyor belts etc). With 33 kilovolts output under load, the E3633 is the strongest and most efficient wide-range antistatic bar in the market. Furthermore, it intelligently adapts itself to the load via built-in determination of the electric field.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3633 Specifications
- Range from 250 to 1’500 mm and beyond
- Length from 600 mm the 750 mm in 250 mm steps to max. 6000 mm
- Power Supply 24 VDC at 2,5 A
- Integrated performant high-voltage generation
- Reactive adjustment to charge via sensory mechanism to 1500 mm
- Automatic or manual mode
- Resistively coupled emitters thus shock-proof finger-safe
- Replaceable tungsten emitter tips protected against impact
- All high-voltage parts integrated and encapsulated (IP64) in ABS-casing
- 5 LED-Display for operation, maintenance need or fault
- Analog interface with M12 5-pin connection for contamination alarm, fault, standby ON/OFF
- CE, UL and CB pending
*with manual setting
Large distances and difficult installation situations possible
Low power consumption, no air needed
Robust, industry-proof design
Easy mounting
Integrated operation monitoring
Low Maintenance
Very efficient neutralisation due to self-adjustment and strong performance
Shockless, finger-safe
Optimal antistatic results due to clever control and field sensing
Very efficient neutralisation due to self-adjustment and strong performance
AC Connection Wide-range power supply 80-250 VAC with 5m feed cable
Supply cables 24VDC
2, 5 or 10m cable for connection to 24 VDC Anschluss an 24V DC operating supply
Mounting Set
Set with mounting plate, with bolt and nut
Replacement Emitters
Replaceable tungsten emitter tips, threaded system
All products within this product category:
E5000
/in Weitbereichselektrode /by adm1n1strat0rE5000 Intelligent Longrange Bar
Your «Swiss Army Knife» with fully automatic adaptation to the task at hand.
Operating range: 30 – 1000 mm Best suited, wherever long distances, over a big range varying distances, changing material and/or high discharging performance with homogeneous results without left charged islands are required – also without air support. The patented E5000 has in its basic version a polarity- and range autocontrol and can easily be extended with remote monitoring, remote control, sensor control and data recording. It is the only antistatic bar in the market 1) also detecting non-conductive contamination and 2) detecting the build-up of contamination gradually and thus can alert early enough before it is too late.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E5000 Specifications
- Range 30 to 1000 mm
- Length 80-400 cm (or more on request) in 10cm steps
- Power supply 24 VDC at 0,7 A
- Intelligent electrode autocontrol for polarity, charge quantity and range
- Contamination monitoring
- Current limited tips for maximum security
- Integrated performant highvoltage generation
- Display of operational status and contamination direct on the antistatic bar
- Interface for easy connectivity with control panels/stations
- No replacement of emitter tips (tungsten) necessary
- Compact dimensions and low weight
- Made in Germany
Extendable + adaptable = future safe
Shockless, touch-safe
Absolutely low in maintenance
Easy mounting
Optimal results at ranges of 30 up to 1000mm to the material
Gradually detects conductive and non-conductive contamination
Highly resistant tungsten emitter tips with a pitch of only 30mm of same polarity
Very homogenous neutralisation over the full width of the web also at very close distances
Variant Remote Control E5000-RC
The Standard E5000 is also in version with remote controlling E5000-RC. It allows the reading and control of settings from a separate location for example when the bar is in a hard to access mounting situation.
All display and control settings are in a separate robust and widht 120 x 80 x 65 mm compact wall housing, which can be mounted in a well-accessible location. Unlike the standard edition, the ionising bar in this edition does not have a control panel. The RC module is available in 2 versions: for the control of 1 or 4 electrodes respectively.
Option Remote Monitoring E5000-RM
Depending on the mounting situation, the display of the E5000 bars display LEDs will be obscured or hard to access. AN easy solution: the remote monitor display E5000-RM.
The remote monitoring unit E5000-RM serves as additional display of operational status of a standard E5000 Ionising Bar and can be mounted at a location with easy access nearby the electrode. Connecting is actually very easy: the display is looped into the supply to the ionising bar with the enclosed cable. Thus, retrofitting is easily possible.
Option Sensor Control EEFM113B
With the field sensor, the ionising bar automatically controls for an absolute minimal residual charge at the point of measurement. Apart from even better results it is possible to cater for difficult mounting situations, because the ionising bar does not need to be at the closest position to the desired spot. Even deflecting and guiding rollers between point of measurement and point of discharge can be controlled for.
Option Data Logging ISM500
The 5,7″ colour LCD panel of the recorder displays the current measurement data of the material charge (field intensity of surface charge) over time as curve. Data can safely be stored on a common SD-Card and easy be processed and archived with Microsoft Excel or the DataManager software. A relais output delivers information about disturbances or exceeding of limits. On request the recorder also ships delivered with an Ethernet interface.
AC Connection Wide-range power supply 80-250 VAC with 5m feed cable
Control Set
A sensor EEFM113B with connector cable to the ionising bar and power supply
Remote Monitor Set
Consists of E5000-RM display and control box and connector cable
Supply cables 2, 5 or 10m cable for connection to 24 VDC Anschluss an 24V DC operating supply
Recorder Option
Paperless recorder ISM-500 with one input channel and 5,7″ colour display
All products within this product category:
IONTIS Elektrostatik GmbH
Friedrich-Rottra-Str. 66
D-79588 Efringen-Kirchen
- Tel. +49 7628 35 94 064
- Fax +49 7628 35 94 065
- mail@iontis.de
Wir verwenden Cookies. Durch das weitere besuchen dieser Website akzeptieren Sie die Verwendung von Cookies.
Einstellungen akzeptierenNur diese Nachricht verbergenEinstellungenCookie and Privacy Settings
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
The following cookies are also needed - You can choose if you want to allow them:
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.
Datenschutzerklärung