P-EC-G02
/in Ionising Airguns /by adm1n1strat0rP-EC-G02 ESD Airgun
The compact leightweight Ionising Airgun in 24 VDC for low residual charge.
P-EC-G02: operating distance up to 1’000 mm A compact, light and handy ionising airgun with excellent performance for manual neutralisation and cleansing of large areas. The P-EC-G02 allows for efficient cleaning with different selectable operation modes. It is very low in maintenance and with its built-in highvoltage generation from a 24VDC input it is able to achieve an excellent ion balance of +/- 10V, which is a base requirement in sensitive areas (e.g. ESD, electronic components) for a safe operation and low residual charges.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
P-EC-G02 Specification
- Working range: up to app. 1’000 mm
- Discharge performance: <0,5 s
- Ultra-light 270g
- Absolutely oilfree design
- Power supply 24 VDC at 70 mA
- Integrated, performant highvoltage generation
- Emitter integrated and protected in casing
- Air connection: 0,5 to 5 bar max. at max. 300 l/min airflow
- Solenoid valve controls air supply
- 3-mode pulse operation (short, long pulse, continuous)
Handy and lightweight, reduces operator fatigue
Adjustable to different cleaning tasks
Shockless touch-safe
Does not require rigid highvoltage cable
Low power consumption
Low maintenance
AC Connection
Wide-range power supply 80-250 VAC with 5m feed cable
Spares
Replacement unit emitter tip and solenoid valve
All products within this product category:
E3015
/in Ionising Airguns /by adm1n1strat0rE3015 Ionising Airgun
The compact and powerful ionising airgun for overhead or low mounting.
E3015: operating distance up to 1’000 mm A compact, light and handy ionising airgun with excellent performance for manual neutralisation of large areas and cleansing up to 1000 mm distance. The E3015 cleanses and neutralises efficiently with air connection and ioniser on the top (e.g. for overhead installation with spring balancer) or optionally at the bottom. Furthermore it has an ergonomic grip also suitable for smaller hands.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3015 Specification
- Operating distance: up to 1000 mm at 4-7 bar
- Integrated anti-static system: E1265 spot type ioniser
- Emitter integrated and protected in stainless steel casing with PTFE-insulated tip
- Shock-resistant blue PBT-Polyester-case
- Exchangeable nozzle head on 1/4” internal screw thread
- Airgun weighs only 165g (without ioniser)
- Air connection: 0,5 to 10 bar max., with 300 l/min airflow (5 Bar)
- Special valve controls air supply: low pressure loss and steady grip pressure independent of airflow
Please note: This is an AC ioniser and unlike the 24V DC counterparts necessarily requires an additional AC Highvoltage Power Unit.
Adjustable to different cleaning tasks due to exchangeable nozzles
Shockless
Ergonomic grip suitable also for small hands
Robust, industry-proof design
Handy, lightweight and low grip pressure required
Low air consumption
Overhead installation on spring balancer possible
Low maintenance
Monitoring Highvoltage Power Supply E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Balancer
For overhead mounting with 1,6m cable drop length
Highvoltage Power Supply 4 Connections E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
All products within this product category:
E3015-24V
/in Ionising Airguns /by adm1n1strat0rE3015-24V Ionising Airgun
A compact and powerful Ionising Airgun in 24 VDC.
E3015-24V: operating distance up to app. 1’000 mm A compact, light and handy ionising airgun with excellent performance for manual neutralisation of large areas and cleansing up to 1000 mm distance. The E3015-24V cleanses and neutralises efficiently with air connection and ioniser on the top. It has an ergonomic grip also suitable for smaller hands. It is powered with 24 VDC: the rigid and fragile HV cable and bulky HV power supply box are not required anymore!Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
E3015-24V Specification
- Operating distance: up to 1000 mm at 4-7 bar
- Integrated anti-static system: E4800 spot type ioniser with 24 VDC powering
- Integrated HV generation
- Emitter safe to touch
- LED display: operation, standby, maintenance/contamination and malfunction
- Shock-resistant blue PBT-Polyester-case
- Exchangeable nozzle head on 1/4” internal screw thread
- Airgun weighs only 165g (without ioniser)
- Air connection: 0,5 to 10 bar max., with 300 l/min airflow (5 Bar)
Special valve controls air supply: low pressure loss and steady grip pressure independent of airflow
Adjustable to different cleaning tasks due to exchangeable nozzles
Shockless
Ergonomic grip suitable also for small hands
Robust, industry-proof design
Handy, lightweight and low grip pressure required
Low air consumption
Small and light-weight cabling – no HV power supply box required
Low maintenance
AC Connection Wide-range power supply 80-250 VAC with 5m feed cable
Balancer
For overhead mounting with 1,6m cable drop length
Supply cables 24VDC
2, 5 or 10m cable for connection to 24 VDC Anschluss an 24V DC operating supply
All products within this product category:
F5000
/in Ionising Airknife /by adm1n1strat0rF5000 Compact Airknife Pressurised Air
An Ionising Airknife for pressurised air in tight mounting situations.
/
F5000: operating range up to 4m for antistatic discharge and <1m for cleaning depending on application.
A compact and robust ionizing air nozzle with good performance for the neutralisation, sheet separation or cleaning of small surfaces and objects up to 1m operating distance. The main feature of the F5000 airknife is its sophisticated nozzle head, which bends the air outflow in a 90 degree angle over its body and then over the emitter tips of the anti-static bar. This brings an advantage in required mounting space especially beneficial in tight mounting situations. The achieved airbeam is thin and fan-shaped.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F5000 Specification
- Distance for cleaning applications: optimal 100 – 150 mm at 70m/s air speed
- Anti-static effect up to 1 m (at 7 Bar)
- Robust aluminium and steel body of nozzle
- Ionisation either with E3010 (AC*) or E3014 (24VDC) standard anti-static bars
- Emitters with resistors
- Air connection: up to 7 Bar max., optimal range app. 5 Bar, 1/4” BSP quick connection
- Air consumption 33 l/min per cm at 5 Bar
- Shockless design
- Critical parts encapsulated in epoxy resin
- CE marking, UL (ioniser) possible on request
*Please note: The AC ionizer, unlike the 24V DC counterparts, necessarily requires an additional AC Highvoltage Power Unit
Easy and flexible mounting
Efficient surface cleaning
Good neutralisation performance
Low maintenance
Shock-proof, finger-safe
Compact, also for complex installation situations
Robust, industry-proof design
Variant AC Bar
The airknife F5000 is also available equipped with an AC bar, which is an older and slightly less efficient technology.
The air specification and performance however, is the same.
Monitoring Highvoltage Power Supply E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Highvoltage Power Supply 4 Connections E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
*The high voltage power supplies listed above also differ in load capacity, which defines the maximum cable length that can be connected: please refer to the detailed pages of the respective power supplies.
All products within this product category:
F5500
/in Ionising Airknife /by adm1n1strat0rF5500 Airknife Blower-fed
An Ionising Airknife with good performance operated via blower*.
/
F5500: operating range up to 4m for antistatic discharge and <1m for cleaning depending on application.
For an easy to install and very efficient electrostatic cleaning, sheet separation, ionized air curtain or anti-static discharge over a distance of up to 4m, more economic than pressurized air solution. Main feature of the F5500 is its sophisticated nozzle head which accelerates a laminar compressed airflow by a factor of 20:1 in a 90° angle over the ionizer thus generating a thin, fan-shaped non-turbulent ionized airflow.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F5500 Specification
- Distance for cleaning applications: optimal 100 – 150 mm at 70m/s air speed
- Anti-static effect up to 4 m (at 7 Bar)
- Robust aluminium body of nozzle
- Ionisation either with E3010 (AC*) or E3014 (24VDC) standard anti-static bars
- Emitters with resistors
- Available in 2 sizes: With 96mm tube and 165mm depth or with 68mm tube and 127mm depth
- Air connection: 76mm or 50mm, from 1m lenth onwards with 2 air connects, one at each end
- Required blower power*: 5,5 kW / m length
- Shockless design
- Critical parts encapsulated in epoxy resin
- CE marking, UL (ioniser) possible on request
*Blower not in scope of delivery
Please note: The AC ionizer, unlike the 24V DC counterparts, necessarily requires an additional AC Highvoltage Power Unit.
Easy and flexible mounting
Efficient surface cleaning
Good neutralisation performance
Low maintenance
Shock-proof, finger-safe
For more frequent use more economical than pressurised air
Robust, industry-proof design
Variant AC Bar
The airknife F5500 is also available equipped with an AC bar, which is an older and slightly less efficient technology.
The air specification and performance however, is the same.
Monitoring Highvoltage Power Supply E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Highvoltage Power Supply 4 Connections E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
*The high voltage power supplies listed above also differ in load capacity, which defines the maximum cable length that can be connected: please refer to the detailed pages of the respective power supplies.
All products within this product category:
F5100
/in Ionising Airknife /by adm1n1strat0rF5100 Airknife Pressurised Air
An Ionising Airknife with an efficient air beam.
/
F5100: operating range up to 4m for antistatic discharge and <1m for cleaning depending on application.
For an easy to install and very efficient electrostatic cleaning, sheet separation, ionized air curtain or anti-static discharge over a distance of up to 4m. Main feature of the F5100 is its sophisticated nozzle head which accelerates a laminar compressed airflow by a factor of 20:1 in a 90° angle over the ionizer thus generating a thin, fan-shaped non-turbulent ionized airflow.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F5100 Specification
- Distance for cleaning applications: optimal 100 – 150 mm at 70m/s air speed
- Anti-static effect up to 4 m (at 7 Bar)
- Robust aluminium body of nozzle
- Ionisation either with E3010 (AC*) or E3014 (24VDC) standard anti-static bars
- Emitters with resistors
- Air connection: up to 7 Bar max., optimal range app. 5 Bar, 1/4” BSP quick connection
- Air consumption 33 l/min per cm at 5 Bar
- Shockless design
- Critical parts encapsulated in epoxy resin
- CE marking, UL (ioniser) possible on request
*Please note: The AC ionizer, unlike the 24V DC counterparts, necessarily requires an additional AC Highvoltage Power Unit
Easy and flexible mounting
Efficient surface cleaning
Good neutralisation performance
Low maintenance
Shock-proof, finger-safe
Robust, industry-proof design
Variant AC Bar
The airknife F5100 is also available equipped with an AC bar, which is an older and slightly less efficient technology.
The air specification and performance however, is the same.
Monitoring Highvoltage Power Supply E3111 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 2 Connections
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 2 connections*
Highvoltage Power Supply 4 Connections E3100 HV PSU with 5 – 5.5 kV output at 230V 50/60Hz or 115V 60Hz with 4 HV connections, monitoring of charge and contamination including an interface (for PLC connection)*
OEM HV Power Supply 1 Connection
E2100 HV PSU with 5 – 5.5 kV output at 115/230V 50/60Hz with 1 connection*
*The high voltage power supplies listed above also differ in load capacity, which defines the maximum cable length that can be connected: please refer to the detailed pages of the respective power supplies.
All products within this product category:
P-ER-Q
/in Ionising blower /by adm1n1strat0rP-ER-Q Ionising Micro-Ventilator
A lightweight Ionising Vent midget suitable also for sensitive production.
p_ER-Q: operating range up to 200 mm An ULTRA-compact ionising ventilator with excellent performance to keep small workbenches or narrow installation situations and tiny areas at production lines free of dust. The P-ER-Q with its 6 x 6,5 x 3,3 cm dimensions already inlcudes an AC highfrequency highvoltage generator achieving a very good ion balance (+/- 10V) and is thus also a good choice for sensitive production environments (ESD).Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
P-ER-Q Specification
- Working range up to app. 200 mm
- Airflow: max. 6 m/s at app. 200 l/min
- Airflow adjustable via rotary knob
- Discharge performance: <1,5s
- Io balance, residual charge: +/- 10 V
- Dimensions 6 x 6 x 3,3 cm
- Power supply 24 VDC at 0,2 A
- Integrated, powerful highvoltage generation
- Removable tungsten emitter units
- Mounting stand and grille variations are supplied
- LED-status: On/neutralisation, malfunction
Very good performance with ion balance of +/- 10 V
Low maintenance
Robust, industry-proof design
Easy and flexible mounting
Integrated monitoring with alert function
Low power consumption
Ultra-compact, especially for narrow installation situations
Very light in weight: a good choice for robot arms and grippers
AC Connection Wide-range power supply unit 100-240 VAC with 1,5m cable
Power Supply Cable
2 and 5 m for connections to 24V DC network of machinery/control systems
Filter Pads 5 replacement filter pads
Emitter Units
Replacement emitter units, easy replacement
All products within this product category:
P-ER-F
/in Ionising blower /by adm1n1strat0rP-ER-F Compact Ionising Ventilator
The Ionising Vent for work desktops in sensitive production environment.
P-ER-F: opearting range 200 – 500 mm A compact ionising ventilator with excellent performance to keep work tables or small production lines anti-static and free of dust and contamination. The compact P-ER-F comes with 2 exchangeable grilles (for distance or wide-area) and achieves with highfrequency technology a very good ion balance (+/- 10V) and is thus best suited for sensitive production areas (ESD).Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
P-ER-F Specification
- Working range app. 200 to 600 mm
- Airflow: 4,2 to 5,5 m/s (at 300 mm distance)
- Switch for 4 speeds
- Discharge performance: <1s
- Ion balance, residual charge: +/- 10 V
- Compact dimensions, vent diameter 120 mm
- Power supply 24 VDC at 0,7 A
- Integrated, powerful highvoltage generation
- Emitter safely integrated in case of grille
- Automatic switch-off at grille removal
- Mounting stand and grille variations are supplied
- LED-status: on/off, neutralisation, dysfunction neutralisation and ventilator
- CE marking and UL certification
Very performant neutralisation with +/- 30 V residual charge
Robust, industry-proof design
Low maintenance
Easy and flexible mounting
Airflow adjustable to application/ need
Option Low-Airflow
The ionizing air blower P-ER-F12 is also available in an identical low airflow version P-ER-F12S with about half the air flow rate: approx. 2 to 4 m/s at a distance of 300 mm at fan position 1 or 4.
This variant is used especially for applications where small and/or light components or foils are processed, so that the work flow is not hindered by lower air flows for the same discharge capacity.
The following specifications differ from the standard model P-ER-F12:
- Air speed: 2.0-4.0 m/s (at 300 mm distance)
- Power: 400 mA
- Ionisation time: <1,5 s
Otherwise the low airflow model does NOT differ from the standard model P-ER-F12 in terms of exchangeable emitter, grille and optional power supply.
Optionale Air Filter
Mountable air filter for high dust loads, filter pads can be exchanged
All products within this product category:
F2050
/in Ionising blower /by adm1n1strat0rF2050 Balanced Ion Blowers
The standard Ion Blower suitable also for low residual charge in sensitive areas.
F2050: opearting range to 500 mm An ion blower with precise neutralisation and excellent efficiency, destined to clean and neutralise entire production lines with ample air supply. The F2050 Series comes in 4 width up to 1050mm and achieves with the integrated balanced highvoltage unit a low residual charge (+/- 30V) – it is also a perfect choice for sensitive production environments.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F2050 Specification
- Working range up to app. 500 mm
- 4 width: 200, 510, 780 and 1050 mm with 1 to 4 blower units respectively
- Airflow controllable up to 2800 l/min per blower unit
- Fans with ball bearings and high life expectancy (120’000 h)
- Discharge performance: <1 s
- Ion balance, residual charge: +/- 30 V
- compact anodised aluminium case, stainless steel stand
- Power supply 12 VDC, comes with wide-range power supply unit
- Integrated, performant highvoltage generation
- Emitter integrated and protected by case
- Visual alert of dysfunction
Very performant neutralisation with +/- 30 V residual charge
Robust, industry-proof design
Low maintenance
Easy and flexible mounting
Airflow adjustable to application/ need
Optionale Air Filter
Mountable air filter for high dust loads, filter pads can be exchanged
All products within this product category:
F2010
/in Ionising blower /by adm1n1strat0rF2010 Ionising Power Blower
The powerful Ion Blower with 2 integrated bars for industrial applications.
F2010: operating range up to 800 mm A powerful ionising air blower for neutralisation and cleansing at long distances and of large areas in automated production. The F2010 is extremely powerful and with the two (!) integrated E3010 ionising bars able to achieve strong and fast neutralisation. The highvoltage generation is already integrated into the case – the blower provides a good cleansing effect.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F2010 Specification
- Working range up to max. 800mm
- Available length 305mm, then 500mm up to 2000 mm in 250mm steps
- Power Supply 230 V AC
- Integrated, powerful highvoltage generation
- 1-axial blower components with 250 mm width each
- Discharge performance: <1s/100mm distance
- Airflow adjustable up to 5’600 l/min each blower
- Blow angle app. 15 degrees
- Neutralisation through two E3010 ionising bars
- High-resisitively coupled emitters
- Robust aluminium case
- Electrodes can easily be dismounted for maintenance via front
High air volume and large fanshaped distribution
Powerful and fast also for fastmoving objects
Low maintenance
Easy and flexible mounting
Shock-proof design
Robust, industry-proof design
Very large surfaces up to 2,5 m possible
Optional Air Filter
Additional air filter that can be mounted on back of device to filter dirt during suction
All products within this product category:
IONTIS Elektrostatik GmbH
Friedrich-Rottra-Str. 66
D-79588 Efringen-Kirchen
- Tel. +49 7628 35 94 064
- Fax +49 7628 35 94 065
- mail@iontis.de
Wir verwenden Cookies. Durch das weitere besuchen dieser Website akzeptieren Sie die Verwendung von Cookies.
Einstellungen akzeptierenNur diese Nachricht verbergenEinstellungenCookie and Privacy Settings
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
The following cookies are also needed - You can choose if you want to allow them:
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.
Datenschutzerklärung