VOLTSTICK
/in Handheld Meter /by adm1n1strat0rVOLTSTICK Simple Bar Checker
A pen-shaped sensory device to detect alternating voltage fields.
For the very quick and simple detection of the working of an AC neutralising ionizer (also to some degree for DC bars). The Voltstick allows the contact-free easy detection, if an AC neutralising ioniser builds-up an alternating field (and in turn ionising charge) and thus if it is working or not. The Voltstick is also available in an ATEX-certified version with EX II 2 G Ex ib IIC T4 classification.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
VOLTSTICK Specification
- Contact-free detection of alternating currency (AC)
- Measuring range 90 – 1000 V at 50/60 Hz
- Green LED indicates readiness
- Upon detection of alternating currency a red LED starts to pulse and an acoustic signal occurs*
- If the reading point is free of charge the tip of the device will constantly illuminate in green and an audible signal starts
- On/Off-switch for torch light
- All external surfaces of the device are of highly insulating material
- Robust doubled casing
- Pen-shaped with pocket clip
- Weight 50g
- Security standard: EN 61010-1; CAT III 1000 V
- Powered by 2 x 1,5 V battery AAA (UM-4)
* ATEX Version: no lamp and no soft button to press, the device is permanently on and operating and ist head is red illuminated when alternating current is detected, there is no acoustic signal
Pocket-size
Simple operation
Quick check whether high voltage is present or not
Robust
no specific accessories
All products within this product category:
F720
/in Handheld Meter /by adm1n1strat0rF720 Static Bar Checker
A small and simple device to control the operation of an anti-static AC bar.
To check for proper operation of the neutralisation function of an AC static elimination bar. The Static Bar Checker F720 works by measuring the electric charge induced onto the internal sensors by the emitter pins of an AC Static Eliminator Ioniser. Thus, an inference on the functionality and required maintenance (e.g. advancing contamination) can be made, yet the device is absolutely easy and safe in operation.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F720 Specification
- Test distance several mm or touching the emitter tips directly
- One-button operation
- Only 99 x 65 x 24 mm in dimension
- 5-step LED-display of electric charge or discharge performance respectively of an AC Ioniser
- Power consumption 16mA
- Operation with a 9V PP3 battery
- Life-cycle of one battery: 34h continuous operation or app. 10’000 single measurements
Pocket-size
Simple operation
Allows to quickly detect malfunction and maintenance need
Robust
no specific accessories
All products within this product category:
F740
/in Handheld Meter /by adm1n1strat0rF740 Surface Resistance Checker
A comfortable portable device to determine the resistance of surfaces.
For the measurement of the resistivity of material surfaces as indication for chargeability and conductivity e.g. when changing material or for non-specifiable material. The SRM F740 allows through the measurement of the surface resistivity to infer the affinity of a material’s surface for electrostatic charge or the possibility for deliberate charging for adhesive matters. Addionally, the conductivity measurement (resistance to ground) allows to determine, if through earthing measures alone, electrostatic charge can be discharged.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
F740 Specification
- Easy testing by simply placing on surface to be tested
- Automatic adaptation of metering range
- Measurement cf. ASTM Standard D257 parallel bar sensing
- One-button operation
- Only 130 x 70 x 25 mm dimensions
- 15-step LED-display of resisitivity and resistance within defined range separated to “Conductive”, “Static dissipative” and “Insulative” surfaces
- Powered by 9V PP3 battery
- Shipped with protective sheath, battery and cable
Pocket-size
Simple to operate: place device on surface, push button and read result
Allows to detect electro-static affinity
Robust
no specific accessories
All products within this product category:
EX715
/in Handheld Meter /by adm1n1strat0rEX715 Static Meter ATEX
The only Electric Field Meter for daily use in hazardous areas (ATEX).
To manually measure the field strength i.e. amount of static charge and polarity of material surfaces. The Static Meter for Hazardous Areas EX715 is the only device in the market and on top of that a handy and safe device to measure the field strength of up tp 200 kV at the location in hazardous areas 1 and 2. Certified for EX II 2 G Ex ia IIB T4/T5Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
EX715 Specification
- Test distance 100mm
- 2 measurement ranges up to 200 kV with autom. adaptation
- Hold button
- Stainless steel sensor, calibration with 150×150 mm plates
- Anodised aluminium case
- Only 124 x 64 x 24 mm in dimensions
- LCD panel displaying charge and polarity
- Powered by 9V PP3 batteries
- Automatic switch-off
- Certified for EX II 2 G Ex ia IIB T4/T5
- Baseefa 07ATEX0159
- Shipped with carrying case, battery, ground cable, manual and calibration certificate
ATEX certified
Pocket-size
Simple operation
Due to HOLD function also easy to measure in difficult places
Robust
no specific accessories
All products within this product category:
EFM715
/in Handheld Meter /by adm1n1strat0rEFM715 Static Meter
The simple and robust Electric Field Meter for daily industrial use.
To manually measure the field strength i.e. amount of static charge and polarity of material surfaces. The Static Meter EFM715 is a handy portable device to measure field strength of up to 200 kV directly at the location.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
EFM715 Specification
- Test distance 100mm
- 2 measurement ranges up to 200 kV with autom. adaptation
- Hold button
- Stainless steel sensor, calibration with 150×150 mm plates
- Anodised aluminium case
- Only 124 x 64 x 24 mm in dimensions
- LCD panel displaying charge and polarity
- Powered by 9V PP3 batteries
- Automatic switch-off
- Shipped with carrying case, battery, ground cable, manual and calibration certificate)
Pocket-size
Simple operation
Due to HOLD function also easy to measure in difficult places
Robust
no specific accessories
All products within this product category:
EFM022
/in Handheld Meter /by adm1n1strat0rEFM022 Comfortable Static Meter
The accurate and very comfortable handheld Field Meter for daily use.
To manually measure the field strength i.e. amount of static charge and polarity of material surfaces. The Static Meter EFM022 is a handy one-button test device with very accurate measurement of field strength of up to 200 kV and not requiring a manual calibration/zero balance. The optional set EFM022- CPM is additionally able to determine the neutralisation performance (over time) of ionising bars.Application
Specialities
+49 7628 35 94 064
We gladly help you to solve your problem.
EFM022 Specification
- One-button operation with Hold functionality
- 5 measurement distances and range up to 200 kV measurement range
- Antistatic EPA casing
- Only 122 x 70 x 26 mm in dimension
- LCD-panel with 2-row display of selected distance and measured electrostatic charge
- Powered by 9V PP3 battery
- Shipped with protective sheath, battery, ground cable, distance holder, manual and calibration certificate
Pocket-size
Very simple operation: 1-handed operation possible
Measuring distance can be set manually if required
Due to HOLD function also easy to measure in difficult places
Robust
Option Charge Plate Monitor
EFM022-CPM to test the performance of neutralising ionisers
With the Charge Plate Set 022 the EFM 022 turns into a Charge – Plate – Monitor (parallel-plate capacitor) to test ionising devices cf. standards EN 100015 bzw. EOS/ESD S.3.1. To this end, an insulated plate, mounted atop the EFM022 is charged up with highvoltage and placed with switched on meter brought in the operating range of the neutralising ioniser. Later should neutralise the charge now, which can be measured over time with the EFM022.
The charging electrode corresponds with its capacity of 20pF to the standards. The neutralisation time from + 1.000V to + 100V or – 1.000V to -100V is measured with a Start/stop Timer integrated into the EFM 022. Charging the capacitor plates is done with a HV converter, part of the whole set and powered via 9V rechargeable battery (incl. battery recharger).
The set contains:
- Carrying case with anti-static rubber foam inlays
- 3 pcs. 9V NiMH – rechargeable batteries
- Battery recharger for 9V r. batteries
- CPS device socket
- Plate Capacitor
- HV converter
- Ground cable 1,5m and 1m
- Crocodile clip
- Operating manual
Charge Plate Monitor
for the periodic manual test of the performance of anti-static ioniser according to standards EN 100015 or EOS/ESD S.3.1 respectively, refer to tab “OPTIONS”
All products within this product category:
IONTIS Elektrostatik GmbH
Friedrich-Rottra-Str. 66
D-79588 Efringen-Kirchen
- Tel. +49 7628 35 94 064
- Fax +49 7628 35 94 065
- mail@iontis.de
Wir verwenden Cookies. Durch das weitere besuchen dieser Website akzeptieren Sie die Verwendung von Cookies.
Einstellungen akzeptierenNur diese Nachricht verbergenEinstellungenCookie and Privacy Settings
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
The following cookies are also needed - You can choose if you want to allow them:
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.
Datenschutzerklärung